microEnable I - the universal frame grabber

microEnable I is a universal frame grabber and coprocessor which stands out by its connectivity, flexibility and variability of performance categories. It is suitable for the acquiring of image sequences with a high frame rates or high resolution. microEnable offers an integrated real time image pre-processing for many application purposes. By the availability of a large number of interfaces many customary cameras are connectable. By choice out of a large number of models, the frame grabber with the ideal performance values for the application can be selected. And not at least microEnable I, as intelligent frame grabber, can be adapted to many tasks and camera specifications by its integrated processor.

The microEnable I product line is technically based on the use of an image processor of Xilinx XC4000 FPGA series and a CMC (common mezzanine cards) hardware connection to enable modular extensions.

Overview
Technical features			Product line			Related products
	General features			Product models			microEnable III/III-XXL
	Hardware features			Additional interfaces			microUSB 2
	Pro-processing features
	Camera features		System requirements			Product archive
	Software features			Supported operational systems (OS)			microEnable II
	Performance data			Camera compatibilities			microEnable subboards
Technical description			Sales
	Data sheets			Distributors

Technical features
General features			Hardware features
	Exploitation of the complete physical memory			Xilinx XC4000 FPGA processor
	Multiprocessor-capability			PCI 32-bit /33 MHz interface
	Multi PCI-bus capability (only limited by numbers of available PCI-busses)			Fast memory with 0,5 - 2 MB SRAM
	Programming of individual solutions by direct access to FPGA-coprocessor			2 x DMA channels
Pre-processing features			Camera features
	Image preprocessing applets included (please ask for compatibility)			Simultaneous run of two cameras in dual operation mode
	I.e. Bayer correction, shading correction and spatial correction			Independent operation and control of cameras
	Special feature: additional image preprocessing on demand			Asynchronous image recording in triggered mode
				Seperated framebuffers
Software features			Performance data
	Software development kit (SDK) for programming interfaces between microEnable and your application			Camera frequency up to 50 MHz clock rate
	Diagnostic tools for a quick and uncomplicated overview of operational functionality and benchmarking of the system			Area cameras up to 4K*4K pixels
	microDisplay for previewing and acquiring of camera sequences			Line cameras up to 16K pixels
	microDisplay for con trolling of the camera parameters and trigger settings			Over 100 MByte/s continous datatransfer rate to user-memory
	VHDL-library with basic applets for imagery functions and basis for programming individual applets			Framerate up to 10.000 f/s

Technical description
Data sheets		language
	microEnable I data sheet	ger/en		Description of microEnable I (ger/en) exclusively
	microEnable product line data sheet	ger/en		Description of product line microEnable I to microEnable III (ger/en)
Documents
	Manuals	ger/en

Product line
Product models			Additional interfaces
	MXS40 microEnable with Xilinx XC4040XL-4 FPGA coprocessor and 512 KB SRAM			Interface for up to 2 CameraLink/Channel-Link cameras
	MXA36 microEnable with Xilinx XC4036XLA-0.9 FPGA coprocessor and 512 KB SRAM (will be discontinued in 2003)			Interface for up to 2 LVDS/RS644 cameras
	MXA44 microEnable with Xilinx XC4044XLA-0.9 FPGA coprocessor and 2048 KB SRAM			Interface for up to 2 RS422 cameras
	MXA85 microEnable with Xilinx XC4085XLA-0.9 FPGA coprocessor and 2048 KB SRAM (will be discontinued in 2003)			Trigger interface with 4 TTL inputs and 4 TTL outputs

System requirements
Supported operational systems (OS)			Camera compatibilities (selection)
	Windows NT Version 4.0			Basler A101, A101c, A101p, A101cp, A113 , A113c, A201b, A201bc, A202k, A301b, A301bc, A302b, A302bc, A501k, L101-1k, L101-2k, L101b-1k, L101b-2k, L101k-1k, L101k-2k, L103-1k, L103-2k, L104-1k, L104-2k, L201, L203, L301bc, L320c
	Windows 2000 Professional			Pulnix TM-6710, TM-9701, TM-1001, TM-1010, TM-1020-15, TM-1020-30, TM-1040, TM-1300, TMC-6700, TMC-1000
	Windows XP (beta)			PhotonFocus MV-D1024k-28CL, MV-D1024k-28CL10, MV-D1024k-80CL
	Linux (up to kernel 2.4.10)			Please ask for your individual system configuration.

Sales
Distributors
	SILICONSOFTWARE Schildkroetstr. 17, D-68199 Mannheim			Direct distribution
	Telefon: Fax: EMail: Web:	+49 (0) 621.789 507 0 +49 (0) 621.789 507 10 info@silicon-software.de www.silicon-software.de
	DAT System Corp. Rm. 302 Yungsun Bldg., 108-8, Garak-Dong Songpa-Ku, Seoul 138-160, Korea		Korea/Asia	Sales of components
	Phone: Fax: Mobile: EMail: Web:	+82 2 402 1854 +82 2 402 1853 +82 11 221 1854 vision@datsys.co.kr www.datsys.co.kr

language change

top of page