microEnable subboards

microEnable subboards are optional frame grabber modules which are available as daughter plates with slot metals or as submodules (pluggable board) for microEnable frame grabber or coprocessor. SILICONSOFTWARE offers frame grabber complete solutions for the industrial image processing - whether for one or two cameras with or without trigger usage. And this for almost every camera type.The microEnable Subboardss are optional Framegrabbermodule which are available as Subplatinen with one screwing cash Slot metals or as Submodule (on-pluggable board) for the microEnable Framegrabber or coprocessor. SILICONSOFTWARE offers you Framegrabber complete solutions -- . And this for almost every camera type.

The default subboard is the frame grabber trigger system. It is used for the control of the frameggrabber or the camera by external signals or for the control of external devices, e.g. strobes. The TTL trigger system offers 4 inputs and 4 outputs and is available for the frame grabbers microEnable I to III..

microEnable I and II are delivered without a special camera interface. You have the choice between three digital formats and the choice between a one camera or two camera system. Please ask for the current support of microEnable I or II for your specific camera in the single or dual mode.

The frame grabber extensions are pluggable modules in CMC form factor (IEEE specification P1386 - common mezzanine cards). They are used for the connection between microEnable I or II and the camera interfaces and trigger systems.
Besides its interface for frame grabber extensions, microEnable II has a on-board interface for up to two CameraLink-/ChannelLink subboards. microEnable III doesn't have any interface for the frame grabber extension , however a direct interface for the trigger system.
At use of the microEnable I or II as a FPGA coprocessor, the frame grabber extension offers up to 64 or 96 digital IOs at your disposal.

View Definition Description Usage
Subboards for connection of cameras
CameraLink camera interface frame grabber interface
FG1CAM-CL		 CameraLink-/ ChannelLink camera interface incl. trigger port
for connection of 1 or 2 CameraLink- or ChannelLink cameras and one trigger per each camera. Additionally cameras with 5V or 12V power suppley will be supported (power supply connecting cable not included).
A second subboard is needed for the operation of two cameras (FG2CAM-CL).
The frame grabber extension (SCSI form factor) EXT-SCSI is required for the connection to microEnable I.		 microEnable I
microEnable II
RS644 camera interface frame grabber interface
FG1CAM-RS644		 LVDS-/ RS644 camera interface
for connection of 1 or 2 LVDS- or RS644 cameras.
A second subboard is needed for the operation of two cameras (FG2CAM-RS644).
The frame grabber extension (IDE form factor) EXT-IDE is required for the connection to microEnable I.		 microEnable I
microEnable II
RS422 camera interface frame grabber interface
FG1CAM-RS422		 RS422 camera interface
for connection of 1 or 2 RS422 cameras.
A second subboard is needed for the operation of two cameras (FG2CAM-RS422).
The frame grabber extension (IDE form factor) EXT-IDE is required for the connection to microEnable I.		 microEnable I
microEnable II
Analogue camera interface frame grabber interface
FG1CAM-Analog		 Analogue camera interface
for connection of analogues cameras over 4 cinch or 2 hosiden jacks.		 be discontinued
Subboards for connection of trigger systems
Trigger port system frame grabber subboard
FG-TTL		 TTL trigger port system
for connection of up to 4 trigger inputs and 4 trigger outputs by TTL signals. Additionally cameras with 5V or 12V power suppley will be supported (power supply connecting cable not included)..
The frame grabber extension (IDE form factor) EXT-IDE is required for the connection to microEnable I and II.
 microEnable I
microEnable II
microEnable III
Subboards for connection of camera interfaces, trigger systems and digital I/Os
Frame grabber extension frame grabber extension
(SCSI form fakcor)
EXT-SCSI

CMC pluggable module (SCSI)
for connection between microEnable I and frame grabber interfaces by IEEE specification P1386 - common mezzanine cards). Connection of up to two CameraLink camera interfaces incl. trigger systems.

 microEnable I
(microEnable II)
Frame grabber extension frame grabber extension
(IDE form factor)
EXT-IDE		 CMC pluggable module (IDE)
for connection between microEnable I or II and frame grabber interfaces by IEEE specification P1386 - common mezzanine cards). Connection of up to two RS644/LVDS or RS422 camera interfaces and two trigger systems.		 microEnable I
(microEnable II)

Suche